How to maintain anti-static epoxy floor paint?

1. After the ground project is completed, it needs to be cured for 7-10 days before use. During the curing period, do not soak the surface with water or other solutions;
2. Workers entering the workshop wear rubber-soled shoes;
3. Iron chairs, iron tables, iron racks and other iron products and hardware should be soft-footed. Or wrap them with rubber. Pad with cardboard to avoid scratching the ground during use;
4. The traction board should lift the board off the ground, and be careful not to let the angle of the board scratch the ground when turning;
5. Use a soft mop or a wet and dry vacuum cleaner to clean the floor, which can be cleaned with clean water or detergent;
6. If there is wear or scratches, a small area can be repaired. If the area is large, it is recommended that you roll it again;
7. Before the equipment enters the factory, a layer of cardboard should be laid on the ground to prevent the ground from being scratched during transportation;